Fugetek 3D Printing Pen

Sold By: Lonestar Industry Group

$31.99

Buy Now from Amazon!

Quickstart Guide 3D Pen

I. Powering And Heating The 3D Pen

A. Connect AC/DC adapter to pen and then plug into wall.
B. Power on the 3D pen by pressing the “filament loading” button/arrow at the front of the unit, you will see a green light start to blink. You will also see the temperature begin to increase on LCD screen. Once the temperature reaches 220 (for ABS), the green LED will stop blinking and you are ready to load the filament.

II. Loading The Filament And Using The Pen

A . Before loading filament, make sure the filament’s tip is cut flat, not at an angle. Insert the filament into the “filament loading hole” at the back of the pen.
B. Now continuously click the “filament loading button”, the filament will start to load into the pen. You may need to put a little pressure to load the filament at first. Once you see melted filament come out of the nozzle, you are now ready to draw.
C. To control the filament speed, click “speed increase” and “speed decrease”, there is a meter to see the current speed on the screen.
D. To draw, hold the “filament loading” button down without releasing, to stop drawing, release the button. Unit will go into sleep mode after 45 seconds to 1 minute. “Filament Loading” button will reactivate the pen. Unit will need to reheat after delayed use, before using again.
E. If you want to change to a new filament, press and hold the “filament unloading button”. This will remove the filament from the back of the pen.

ASIN #B01MFFCVQ5
EAN #0701806555199
UPC #701806555199


SKU: ASIN-B01MFFCVQ5 Category: Tags: , , ,

Description

Quickstart Guide 3D Pen

I. Powering And Heating The 3D Pen

A. Connect AC/DC adapter to pen and then plug into wall.
B. Power on the 3D pen by pressing the “filament loading” button/arrow at the front of the unit, you will see a green light start to blink. You will also see the temperature begin to increase on LCD screen. Once the temperature reaches 220 (for ABS), the green LED will stop blinking and you are ready to load the filament.

II. Loading The Filament And Using The Pen

A . Before loading filament, make sure the filament’s tip is cut flat, not at an angle. Insert the filament into the “filament loading hole” at the back of the pen.
B. Now continuously click the “filament loading button”, the filament will start to load into the pen. You may need to put a little pressure to load the filament at first. Once you see melted filament come out of the nozzle, you are now ready to draw.
C. To control the filament speed, click “speed increase” and “speed decrease”, there is a meter to see the current speed on the screen.
D. To draw, hold the “filament loading” button down without releasing, to stop drawing, release the button. Unit will go into sleep mode after 45 seconds to 1 minute. “Filament Loading” button will reactivate the pen. Unit will need to reheat after delayed use, before using again.
E. If you want to change to a new filament, press and hold the “filament unloading button”. This will remove the filament from the back of the pen.

BindingOffice Product
BrandFugetek
ColorBlack
LabelFugetek
ManufacturerFugetek
ModelFT-750/rp700A
Package Quantity1000
Part NumberFT-750/rp700A
Product GroupArt and Craft Supply
Product Type NameART_SUPPLIES
PublisherFugetek
StudioFugetek
TitleFugetek 3D Printer Pen with LCD Screen Displays Multi speed and temperature, 3D Arts and Crafts drawing pen doodler for toys, art education tools (White/Black)

Reviews

There are no reviews yet.

Be the first to review “Fugetek 3D Printing Pen”

Your email address will not be published. Required fields are marked *

To Top